HYTEC INTER

Contact Us

Import

DLB2
Outdoor wireless AP / bridge (Omnidirectional antenna covers a wide range of 360 °) (external antenna sold separately)

Product Features

DLB2 Wi-Fi AP / Bridge is an outdoor wireless device that supports 2.4GHz band that can be used as an outdoor wireless LAN access point or bridge.
It supports a wide operating temperature of -40 to + 65 ° C and can be installed in places with severe temperature conditions.

Covers a wide range of 360°with an omnidirectional antenna. Ideal for building access points.

This product is RoHS compliant.

Connection configuration example (Wi-Fi wireless spot)
Connection configuration example (Wi-Fi wireless spot)

Connection configuration example (Wi-Fi wireless spot, wireless LAN video monitoring)
Connection configuration example (Wi-Fi wireless spot, wireless LAN video monitoring)

Connection configuration example (wireless LAN video monitoring)Connection configuration example (wireless LAN video monitoring)

*1:When using in the 1: N configuration, it is recommended that the N side limit the number of cameras connected to 1 unit.
*1:The Ping Watchdog function cannot be used when using the 1: N configuration.

Device settings
– Access Point mode(Auto WDS)
IEEE Mode:802.11n, Channel:(24xxMHz)/20MHz(Select from list)
Autorate mode:Alternative(PER Based), Short GI:Off
Radio mode:MIMO or SISO(Select according to communication characteristics)
Max 802.11n MCS index:Select according to communication characteristics
– Station mode
Channel width:20MHz, Autorate mode:Alternative(PER Based)
Short GI:Off, Radio mode:MIMO or SISO(Select according to communication characteristics)
Max 802.11n MCS index:Select according to communication characteristics

Installation example (Omni antenna)
設置例(オムニアンテナ)

The perfect solution for these customers

– Want to build an access point.
→Covers a wide range of 360 ° with an omnidirectional antenna
– Want to use it outdoors
→Wide operating temperature from -40 to + 65℃
→Waterproof and dustproof performance : IP65
→Supports PoE (original method) and can be used in places where it is difficult to wire the power supply to the terminal.

Product Specifications

Product name DLB2 Wi-Fi AP/Bridge
Product code 181-FN-005
Wireless LAN related standards IEEE802.11b/g/n
Wired LAN interface – RJ-45 (10/100BASE-TX) x1port
10/100BASE-TX Full/Half duplex automatic detection
Auto MDI/MDI-XFunction
Power over Ethernet PD (Original method)
Antenna type, gain Omni antenna x2 (MIMO) *1
2.4GHz band : 5dBi
Directivity
(Horizontal plane / vertical plane (3 dB width))
Omni : 360°/30°
Antenna connection connector N-Type female x2
Security WPA/WPA2 Personal、WPA/WPA2 Enterprise、UAM
Protocol DHCP, SNMP, NTP, PPPoE, HTTP, HTTPS
Modulation technology DSSS, OFDM
Modulation method 802.11g/n : OFDM : 16/64QAM, QPSK, BPSK
802.11b : DSSS (CCK, DQPSK, DBPSK)
Frequency band 2.412~2.472GHz
Maximum communication speed 802.11b : 11Mbps
8011g : 54Mbps
802.11n : 300Mbps
Number of channels 802.11b/g/n (HT20) : 13
802.11n (HT40) : 9
Number of SSID registrations 8
Action mode Access point, station*2
Maximum transmit power 20dBm
Reception sensitivity -79dBm
Management function HTTP/HTTPS, SSH, SNMP (read only) v1/v2c/v3, WNMS, Telnet
Power supply DC24V ※Use the included PoE adapter or optional power supply.
Power consumption 4.5W (Maximum)
Operating temperature -40~+65℃
Operating humidity 0~90% (No condensation)
Storage temperature -40~+65℃
Size (W) 150 x (H) 115 x (D) 55 mm (Does not include protrusions)
Weight 450g (only a main body)
Installation method Wall mount, Prop mount
Waterproof and dustproof performance IP65
Certification TELEC (Certification number : 003-160099)
VCCI ClassB, FCC, CE Marking, RoHS
Accessories Installation bracket x1
Installation bracket mounting screws x1
Pole mounting clamp*3 x2
LAN cable mounting rubber seal x1
Ground terminal connection screw x1
Wall mounting screws (M3.5 x32) & anchors x4
Dedicated PoE adapter x1
AC cable x1
Product warranty period 1year

*1 Optional product: It is not possible to connect and operate antennas other than the APC5M-H / DLB common omni antenna.
*2 Customers who wish to use in repeater mode, please contact us separately.
*3 Mountable pole diameter range: 40-64 mm in diameter.

Optional product
DLB2 set product
Product name Product code
DLB2 Omni Antenna / Coaxial Cable 50cm Set 181-FN-K005
DLB2 Omni Antenna / Coaxial Cable 100cm Set 181-FN-K007
DLB2 Omni antenna set (directly connected to the antenna) 181-FN-K013

*Omni-antenna / Two coaxial cables per set.

DLB2/5 Antenna for the main body
Product name Product code
APC5M-H / DLB common omni antenna ×1 182-MA-001
omni antenna for APC5M-H / DLB (NP) ×1 182-MA-007

*Antenna gain : 5 dBi when connected to DLB2 / 7 dBi when connected to DLB5.
*182-MA-001 : Connect the antenna and the main unit via a coaxial cable (50/100 cm) / 182-MA-007: Connect the antenna and the main unit directly.

5DSFA coaxial cable
Product name Product code
N(P)-50-5DSFA coaxial cable (50cm) 183-SC-001
N(P)-100-5DSFA coaxial cable (100cm) 183-SC-002
Optional power supply
Product name 802.3 af to 24V Gigabit PoE Converter DC9-36 to DC24 Giga PoE injector
HPI-3201G-DC
Product code 174-FN-002 174-HY-001
Standard IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
Interface DATA + PoE Out
(24VDC)
RJ-45 10/100/1000BASE-T x1port
DC24V Output
DATA+PoE In
(802.3af/at)
RJ-45 10/100/1000BASE-T x1port
IEEE802.3af/at (PD)
DATA+POWER
(OUT)
RJ-45 10/100/1000BASE-T x1port
DC24V Output
DATA (IN) RJ-45 10/100/1000BASE-T x1port
Power supply DC jack φ2.1 x 5.5mm
Terminal block Usable wire diameter : AWG14~28
Peeling margin range : 6~7mm
DC terminal input voltage DC36~60V (Terminal polarity automatic recognition)
PoE Input voltage DC36~60V DC9~36V
Output voltage DC24V
Output power 13W (Maximum) 12W (Maximum)
Power consumption 20W (Maximum)
Size (Does not include protrusions) (W) 117 x (H) 34 x (D) 86 mm (W) 71 x (H) 22 x (D) 66 mm
Weight 300g 140g
Operating temperature -20~+65℃ -20~+60℃
Operating humidity (No condensation) 0~90%RH 10~90%RH
Storage temperature -40~+85℃ -20~+85℃
Certification RoHS
Product warranty period 1years
Accessories DIN rail metal fittings (installed on the main body) x1 Power terminal block x1

Product appearance

SPEC

– Wireless LAN related standards:IEEE802.11b/g/n

– Directivity (horizontal plane / vertical plane (3 dB width))
Omni:360°/30°

– Frequency band:2.412~2.472GHz

– Operation mode:Access point, station