Our Brand

ABiLINX 2502T

Our Brand

Product Features

The ABiLINX 2502T G.SHDSL.bis EFM modem can achieve communication at a distance that greatly exceeds the distance limit of LAN by using the installed premises telephone lines and other metal wires.

You can check the communication status from the LCD panel mounted on the front, and easily adjust setting using the button interface without using a PC.

The link speed is adaptive mode from 192kbps to 11Mbps per pair, and up to 2 pairs can be used.

Since the upper and lower speed limits can be set, the stability of communication status can be maintained.

This product is RoHS compliant.

Connection Configuration Example

Transmission speed・Distance data
Speed	Distance
Speed	Metal wires 0.4mm	Metal wire 0.5mm
11Mbps（1pair）	approx. 0.9km	approx. 0.9km
5.7Mbps（1pair）	approx. 1.8km	approx. 2.7km
2.3Mbps（1pair）	approx. 2.7km	approx. 3.6km
192kbps（1pair）	approx. 6.０km	approx. 9.0km

– Measurement environment
Line simulator (no noise)

– Device settings
PAM Mode：AUTO_EXT_PAM, MaxLineRate：11328000bps, MinLineRate：192000bps, Target Margin：16dB

The perfect solution for these customers

(LAN extension)
– Extend local area network (LAN) by several kilometers.

(Introduction of new network)
– Want to build a network by effectively utilizing the existing wiring (telephone line) on the premises.
– No optical fiber is laid on the premises.
– Experience of not being able to use VDSL or ADSL equipment in the past.
– Want to install it in an environment where it is difficult to bring a PC.

(Replacing an existing modem)
– The stable communication has not been achieved with metal wires due to a lot of noise on the premises.

Product Specifications

Product name	ABiLINX 2502T * ABiLINX is a registered trademark of HYTEC INTER.
Product code	121-AB-013
Standard	IEEE 802.3
Transmission method	ITU-T G.991.2-2003 (SHDSL.bis)
Transmission speed	1 pair : 192kbps～11328kbps ※Can be set in 64kbps units
Frequency band used	0～2275.2kHz *Bandwidth varies depending on the transmission method.
Maximum frame length	1532byte (including VLAN Tag)
Management function	TELNET, SSH, SNMP, HTTP, Console
Interface	LAN	RJ-45×4port (10/100BASE-TX, Auto-negotiation, Auto MDI/MDI-X) ×4port
	DSL	RJ-11×1port
	Console	RS-232C (DB9)×1port
Size	(W) 210×(H) 43.5×(D) 200mm (Does not include protrusions)
Weight	825g (only a main body)
Power supply	Input　AC adaptor 100～240V 50/60Hz
	Output　DC 12V
Power consumption	7.2W
Operating temperature	0～40℃
Storage temperature	-20～+70℃
Operating humidity	5～90％RH (No condensation)
Standard / Certification	VCCI Class B, PSE, RoHS, WEEE, CE Marking
Function	Arbitrary setting of management VLAN ID is possible
Product warranty period	1years
Accessories	RJ-11 cable X１ RJ-45 cable　X１ AC adaptor X１