The MaxiiCopper Vi2300A series is a device that extends the PoE (+) transmission distance using a LAN cable. A wide operating temperature of -40 to + 75 ° C has been achieved in a compact housing.

The LAN transmission distance, which is normally limited to 100m, is extended to a maximum of 900m by PoE pass-through. Furthermore, it is possible to supply power to the PoE terminal connected to the slave unit.

By connecting the AC adapter to the main unit, it can also be used as a LAN extension device for data transmission only.

This product enables highly reliable communication by transmitting LAN data as a digital signal with a signal recovery function, so it is more resistant to noise than conventional DSL and PLC analog signals modulation, plus it also has a reliable transmission speed*
*(Connect at either 100 Mbps or 10 Mbps depending on the installation environment)

Furthermore, the transmission delay is as low as 1 ms or less, making it ideal for video and audio transmission that requires real-time performance.

RoHS directive 10 substance compliant product.

*When using a PoE extension device (MaxiiCopper series), it may require higher power than the PD’s required power due to the power of the PoE extension device itself and cable loss. Vi00026 is a device that solves the compatibility problem between POE power supply equipment and power receiving equipment.

Lightning surges are a natural disaster and will be repaired with a fee.
If there is a possibility of a lightning surge, we recommend installing a surge protector (SPD) and connecting a ground to protect it from the viewpoint of fault tolerance.

Usage example

Install a wireless access point in a place where power cannot be obtained

PoE extension from the server room on the premises of the power plant to the floor of the power generation facility.
Extended up to 900m with a LAN cable!
Since it can supply 26W at 500m, it is possible to install an 802.11at wireless access point even if there is no power supply at the site.

*1 : The transmission speed automatically switches depending on the length of the LAN cable used.
*2 : When using only the AC adapter, power cannot be supplied to the PoE power receiving device (PD). When using the AC adapter, use the optional accessories sold separately.

*Maximum 30W power supply – PoE voltage 56V output (using TR30P-560-03 PoE injector)

*Maximum 60W power supply – PoE voltage 52V output (using MaxiiPower Vi2202)

*This is the power supply distance performance when the LAN cable length on the PD side such as an IP camera is 100 m. If the LAN cable length is 2m, the above power supply power will be +1.5 to 2.5W.

*When using the MaxiiCopper series with a LAN extension, please purchase the above AC adapter separately.