HYTEC INTER

Contact Us

Import

MaxiiCopper Vi2400A series

Product Features

The MaxiiCopper Vi2400A series is a device that extends the PoE (+) transmission distance using a coaxial cable. A wide operating temperature of -40 to + 75 ° C has been achieved in a compact housing.

Ethernet transmission is possible with a 5C-2V coaxial cable, and PoE pass-through extends up to 900m. Furthermore, it is possible to supply power to the PoE terminal connected to the slave unit.

By connecting the AC adapter to the main unit, it can also be used as a LAN extension device for data transmission only. (LAN extension: up to 1500m).

This product enables highly reliable communication by transmitting LAN data as a digital signal with a signal recovery function, so it is more resistant to noise than conventional DSL and PLC analog signals modulation, plus it also has a reliable transmission speed※.
*(Connect at either 100 Mbps or 10 Mbps depending on the installation environment)

Furthermore, the transmission delay is as low at 1 ms or less, making it ideal for video and audio transmission that requires real-time performance.

RoHS directive 10 substance compliant product.

*Vi2400A is fixed to Master setting. Also, it cannot be used between Vi2400A. Use Vi2401A, 2404A, 2408A, 2416A for the opposite device.
*Do not ground the outer conductor of the coaxial cable used. Also, do not allow it to come into contact with other conductors. The current may loop and cause malfunction.
*When using a PoE extension device (MaxiiCopper series), it may require higher power than the PD’s required power due to the power of the PoE extension device itself and cable loss. Vi00026 is a device that solves the compatibility problem between POE power supply equipment and power receiving equipment.

To prevent breakdowns due to lightning strikes

Lightning surges are a natural disaster and will be repaired with a fee.
If there is a possibility of a lightning surge, we recommend installing a surge protector (SPD) and connecting a ground to protect it from the viewpoint of fault tolerance.

Coaxial cable compatible SPD
Product code Product name
156-HY-002 HSP-BNCJJ75-V3

Connection configuration example



Measurement environment
Uses 5C-2V coaxial cable

Device settings
– Vi2401A
PSE side: Slide switch Local, DIP switch Off (Slave)
PD side: Slide switch Remote, DIP switch On (Master)

The perfect solution for these customers

Excellent features
– Want to install it in a place where power wiring to the terminal is difficult.
– Want to install it in a place where communication between bases is required at a distance exceeding 100 m.
– Want to use it in a place with severe temperature conditions.
– Want to use it in a place where it is difficult to secure installation space.
– Want to use it for video transmission of a megapixel camera.

Product Specifications

Series name MaxiiCopper Vi2400A series
Product name Vi2400A (For Slave unit only) Vi2401A (Master unit / slave unit)
Product code 173-VG-005 173-VG-006
Transmission method Manufacturer’s original method
Transmission speed*1 10/100Mbps
Frequency band used 100BASE-TX about 0~125MHz
10BASE-T about 0~12.5MHz
Maximum frame length 5063byte (including VLAN Tag)
Interface 10/100BASE-TX
port
– RJ-45 x1
10BASE-T (Full duplex) /100BASE-TX (Full duplex)
Auto MDI/MDI-X対応
Coaxial Extended
Ethernetport
– BNC x1
10BASE-T (Full duplex) /100BASE-TX (Full duplex)
*Automatic recognition
Configuration*3 DIP Switch None (Master, Remote Fixed) Master/Slave
Slide switch Remote/Local
Impedance 75Ω
Connectable PD terminal (when PoE is extended) 25.5W or less (IEEE802.3af/at)
Input power (when PoE is extended) 37W (maximum)
Size (Does not include protrusions) (W) 44 x (H) 25 x (D) 50 mm (W) 40 x (H) 30 x (D) 95 mm
Weight (only a main body) 86g 126g
Housing Aluminum
Power supply – DC12V*2 ( When using for LAN extension )
– PoE input (When using with PoE extension )
Power consumption (Maximum) 1.8W 2.5W
Operating temperature -40~+75℃
Operating humidity 0~95% (No condensation)
Storage temperature -40~+80℃
Certification VCCI classA, RoHS10 material, CE Marking, WEEE
Product warranty period 3years
Accessories Power connector x1

*1 : The transmission speed automatically switches depending on the length of the LAN cable used.
*2 : When using only the AC adapter, power cannot be supplied to the PoE power receiving device (PD). When using the AC adapter, use the optional accessories sold separately.
*3 : Vi2400A is fixed to Master setting. Also, it cannot be used between Vi2400A. Use Vi2401A, 2404A, 2408A, 2416A or Vi2600 series as counter devices.

Series name MaxiiCopper Vi2400A
Product name Vi2404A (Master unit) Vi2408A (Master unit) Vi2416A (Master unit)
Product code 173-VG-007 173-VG-008 173-VG-009
Transmission method Manufacturer’s original method
Transmission speed 10/100Mbps
Frequency band used 100BASE-TX abount 0~125MHz
10BASE-T abount 0~12.5MHz
Maximum frame length 5063byte (including VLAN Tag)
Interface 10/100BASE-TX
Ethernetport
RJ-45 x4 RJ-45 x8 RJ-45 x16
– 10BASE-T (Full duplex) /100BASE-TX (Full duplex)
– Auto MDI/MDI-X対応
Coaxial Extended
Ethernetport
BNC x4 BNC x8 BNC x16
– 10BASE-T (Full duplex) /100BASE-TX (Full duplex)
*Automatic recognition
Configuration None (Slave, Local fixed)
Impedance 75Ω
Connectable PD terminal (when PoE is extended) 25.5W or less (IEEE802.3af/at)
Input power (when PoE is extended) 37W (Maximum)
Size (Does not include protrusions) (W) 92 x (H) 42 x (D) 85 mm (W) 432 x (H) 44 x (D) 88 mm
Weight (only a main body) 265g 820g 1500g
Housing Aluminum
Power supply – DC12V (When using for LAN extension)
– DC12V & PoE Input (When using with PoE extension )
Power consumption (Maximum) 6W 14.4W 30W
Operating temperature -40~+75℃
Operating humidity 0~95% (No condensation)
Storage temperature -40~+80℃
Certification VCCI classA, RoHS10 material, CE Marking, WEEE
Product warranty period 3years
Accessories AC adapter (TRE25120-A-1489G13 AC adapter (loose end) )
Power connector x1
AC adapter (TRE25120-A-1489G13 AC adapter (loose end) ) )
Power connector x1
Vi2601 with built-in PoE injector + compact design Vi2400A set
Product name Vi2601+Vi2400A
Product code 173-VG-K001
Power supply distance performance [Maximum 30W power supply]
Link speed Power supply
Distance 100m 100M 22.0W
200m 100M 21.0W
300m 100M 20.0W
400m 100M 18.5W
500m 100M 17.5W
600m 100M 16.0W
700m 10M 14.0W
800m 10M 12.5W
900m 10M 11.0W

*Maximum 30W power supply – PoE voltage 56V output (using TR30P-560-03 PoE injector)
*This is the power supply distance performance when the LAN cable length on the PD side such as an IP camera is 100 m. If the LAN cable length is 2m, the above power supply power will be +1.5 to 2.5W.

Paid optional product
Used for PoE extension
Product name HPI-XG30
Product code 174-HY-005
Coaxial SPD
Product name HSP-BNCJJ75-V3
Product code 156-HY-002
Used for LAN extension (Vi2401A)
Product name TRE25120-A-24G13 AC adapter
Product code 167-CN01-0015
Used for LAN extension (Vi2400A)
Product name TRE25120-A-1489G13 AC adapter (loose end)
Product code 154-CN-019
DC adapter with UPS (uninterruptible power supply) function (Vi2401A)
Product name OS12-5200
Product code 165-PB-002

*When using the MaxiiCopper series with a LAN extension, please purchase the above AC adapter separately.

Product appearance

SPEC

– Operating temperature:-40~+75℃

– Compact design

– Transmission speed
10Mbps/100Mbps ※Automatic switching

– PoE pass-through function enables power reception from PoE injectors and PoE switches and power supply to PD devices.

– Achieves high throughput even during PoE power supply.
When 100BASE-TX:1,518byte, Maximum 98.7Mbps
When 100BASE-TX:64byte, Maximum 76.2Mbps

– PoE power supply  maximum transmission distance
Link speed 10Mbps:900m
Link speed 100Mbps:600m
(Uses 5C-2V coaxial cable)

– Can be used as a normal LAN extension device by driving only a DC power supply (each AC adapter) .
Link speed 10Mbps:1,500m
Link speed 100Mbps:600m
(Uses 5C-2V coaxial cable)

– Setting function
DIP switch(Speed setting)
Slide switch(Master unit / slave unit)
*The slide switch is installed only on Vi2401A.

– Connection configuration example
Point-Point(Vi2400A / Vi2401A)
Point-Multioint
(Slave unit:Vi2400A / Vi2401A
Master unit :Vi2404A / Vi2408A / Vi2416A)

*When using Vi2400A, Vi2401A with LAN extension, please purchase an AC adapter separately.